Mix and match as many as you’d like for a variety of colorful prints. 250ft spools are approximately 1/2lb (225g) of material, 500ft spools are approximately 1lb (450g) of material and 1000ft spools are approximately 2lb (1kg) of material. You can print dozens of parts with one spool.
Black
White
Blue
Green
Red

250ft ABS-R3 3D Ink® $16 Ea.

ABS-R3 3D Ink® is a proprietary blend made exclusively by M3D and it is a non-toxic biodegradable thermoplastic. ABS-R3 is a new addition to our current ABS-R offering that is an ABS replacement filament for engineering needs. Both ABS-R and ABS-R3 filaments print with better bed adhesion and lack the off gassing odor normally experienced with the standard marketplace options. Where ABS-R3 stands out is its flexible properties that reduce warping while showing even greater improvement in bed and layer adhesion compared to standard options.

Technical Specifications:

  • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software.
  • Recommended Extrusion Temperature: 215 - 235°C
  • Recommended Heated Print Bed Temperature: 80 - 98°C
  • Recommended Build Surfaces: painter's tape, glue stick
  • Other Printer Requirements: heated bed, part cooling fan

Pro Tip:

To prevent clogged nozzles when changing between filaments, we suggest having separate nozzles when using Carbon Fiber and ABS-R lines of filament. Why? Due to the different heat requirements and material properties of these higher-temp, particle-filled filaments, it becomes difficult for softer, lower-temp filaments like PLA and Tough to completely push out Carbon Fiber and ABS-R from the nozzle.

Details & Reviews
Black
White
Blue
Green
Red

500ft ABS-R3 3D Ink® $38 Ea.

ABS-R3 3D Ink® is a proprietary blend made exclusively by M3D and it is a non-toxic biodegradable thermoplastic. ABS-R3 is a new addition to our current ABS-R offering that is an ABS replacement filament for engineering needs. Both ABS-R and ABS-R3 filaments print with better bed adhesion and lack the off gassing odor normally experienced with the standard marketplace options. Where ABS-R3 stands out is its flexible properties that reduce warping while showing even greater improvement in bed and layer adhesion compared to standard options.

Technical Specifications:

  • Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software.
  • Recommended Extrusion Temperature: 215 - 235°C
  • Recommended Heated Print Bed Temperature: 80 - 98°C
  • Recommended Build Surfaces: painter's tape, glue stick
  • Other Printer Requirements: heated bed, part cooling fan

Pro Tip:

To prevent clogged nozzles when changing between filaments, we suggest having separate nozzles when using Carbon Fiber and ABS-R lines of filament. Why? Due to the different heat requirements and material properties of these higher-temp, particle-filled filaments, it becomes difficult for softer, lower-temp filaments like PLA and Tough to completely push out Carbon Fiber and ABS-R from the nozzle.

Details & Reviews